YF 8650E250 Series Electric Inlet Guide Vane Actuator
The Young & Franklin 8650E250 Series EIGV Actuators are built to withstand the rigors of frame turbine operating environments. These electric actuators are an upgrade from hydraulic air inlet controls, providing more reliability and better overall turbine performance. The E250EIGV Actuators are available with peak force of 11,200 lbf. and 1.97 in stroke length.
The 8650 Series features a sealed gear-train lubrication system, is self-contained and requires minimal maintenance. The entire assembly has been tested to over 20 years at temperature and load.
- Specs
- Applications
- Documents
| Model | 8650E201 Series | 8650E250 Series |
| Peak Force | Up to 30,000 lbf (133,400 N) | Up to 11,250 lbf (50,000 N) |
| Total Stroke | 4 in. (101.6 mm) | 2 in. (50 mm) |
| Slew Rate | Up to 0.60 in/s (15 mm/s) | Up to 1.18 in/s (30 mm/s) |
| Fail-Safe Mode | N/A | Spring (Extend) |
| Mounting Type | Bolted or Welded | Bolted |
| Operating Temperature Range | ‐40° to +266°F (‐40° to +130°C) | |
| Command | 4-20 mA Position, -8 to +8 mA Triple Redundant Velocity | |
| Ingress Protection | Available in IP54 and IP65 | |
| Maintenance Interval | 8 years (Gear‐train oil change only) | |
| LVDT Wiring | 6.56 ft (2 m) Flying Lead or MIL Connector | |
| Motor Wiring | 32.8 ft (10 m) Jacketed Cable | |
| Service Life | >20 Years | |
| Environmental | MIL-STD-810 – Shock and Vibration | |
| Certifications | Class 1 Div 2, Group B, C & D, T3 Ex db ib IIB+H2 T3 Gb | |