9200 Series Isolation Valve

This two-way, solenoid operated, pilot controlled isolation valve meets the requirements for a fast acting, high temperature shutoff valve for use on GE Energy, Pratt & Whitney, Rolls-Royce, and other turbine engines.

 There is a single main stage inlet port, an outlet port, and a pilot stage vent port. The valve is used to rapidly shut off gas fuel flow upstream of the gas control valve in the event of a turbine trip condition. The valve then isolates the fuel source from the turbine engine. 

The 9200 Series Isolation Valves come in the 120 VDC and 24 VDC versions The units are certified to ATEX EEx d IIB+H2 T3, UL/CSA/FM Class I, Div. 1&2, Groups B,C,D. The valve can be used with air, natural gas or liquid fuels. Y&F’s 9200 Series Isolation Valves are NACE compliant. Available in Double Block & Bleed.

  • Specs
  • Applications
  • Documents
  • Ambient Temperature: -40°F to 185°F 
  • Fluid Temperature: -40°F to 300°F 
  • Operating pressure range: 125 psig to 1060 psig 
  • Main cracking pressure: ≤100 psig 
  • Valve leakage classification: ANSI/FCI 70-2, Class IV
  • Valve flange rating: 600# RF 
  • Closing response time: <100 ms 
  • Opening response time: ≤ 1 sec (due to lower operating pressure range)
  • Limit switch: Open, Closed 24 VDC 
  • Valve flow capacity: 400 ppm @ 500 psia and 10 psid, air @ 65°, Cv=71 
  • Cycle life: 22,000 cycles 
  • Reverse pressure: 650 psig 
  • Proof pressure: 1600 psig 
  • Wiring interface: Solenoid, 1/2 NPT, 3 wires; Limit switch: 1/2 NTP-14, 3 ft. leads
Scroll to Top